Viconics VWZS Integration Guide Bedienungsanleitung

1 Viconics Wireless Controller Driver Guide Wireless Controller Driver Guide Used With VWG-APP-1000 Wireless Card For Tridium® JACE 2, 6 &am

10  Yellow device / node / controller have given out its 6 addresses to other devices in building A.  Building B devices / nodes / controlle

11 5H stands for 5 hops maximum recommended. 5H is for a simple process when laying out the architecture of the network. ANY given device / no

12

13 Proper design considerations need to be addressed prior to any installation of a JACE with a Viconics wireless communication card and related

14  Non line of sight distance for typical gypsum wall partitions made with metal stud frame should be under 30 feet ( 10M ) 3. Ensure th

15 4. Ensure that at least one controller is within 30 feet of the VWG for every cluster of 10 controllers installed. 5. Always try to locate

16 50 feet (15 M)

17 JACE and Wireless Communication Card Configuration Initial Configuration Note: The following instructions assume you are familiar with t

18

19  Right hand click the “WirelessTstatNetwork” driver to load the network property sheet  Under the Serial Port Configuration, set Port

2 Compatibility & History Revision Table Release 1, May 2009 Associated Jar Files Revision Level Associated Displayed Drive

20

21 VWG ZigBee Settings Those settings are where you set the ZigBee PAN ID (Personal Area Network Identification) address and the channel for th

22  When properly configured, the issue of RF interference and lost data between the Jace-Driver and the controllers can be avoided. Without

23 Controller Discovery & Database Tools IMPORTANT NOTE (Please Read Carefully): The communication layer operates differe

24 FOR MORE INFORMATION ON THE DISCOVERY PROCESS & GENERAL SYSTEM ARCHITECTURE, please refer to the survey tool manual which provides more i

25  Status. Indicates if the current controller is online to the JACE or not. o If online, the status will be {OK} and the controller line w

26 Then select the required controller model number that will be installed on the job site. Remember to select ALL controllers if more than one

27  Edit. Allows you to edit the characteristics assigned to any specific wireless controller. The controller name, Com Address and enabled f

28 Status: Will give the sanity of the wireless controller to the network o (ok) Device heartbeat reporting properly with no fault encounter

29 Device Info, Address Info & Communication Module Info: All read only properties related to the local controller and are given as general

3 Trademarks Niagara, Niagara AX is a registered trademark of Tridium, Inc. Disclaimers NO WARRANTY. Viconics, Inc. (herein after refe

30 It is safe to assume that if more advanced functions and services are added to the station, the available resources for the driver will be l

31 Objects Supported By Models: (VT7200 & VT7300 Series) Please refer to the specific installation guide of each VT720

32 Object Name Object Type Object Property VT7200C5x00W VT7200F5x00W VT7300A5x00W VT7305A5x00W VT7300C5x00W VT7305C5x00W VT7350C5x00W VT7355C5x

33 Object Name Object Type Object Property VT7200C5x00W VT7200F5x00W VT7300A5x00W VT7305A5x00W VT7300C5x00W VT7305C5x00W VT7350C5x00W VT7355C5x

34 Objects Supported By Model (VT7600 Series) Please refer to the specific installation guide of each VT7600 controller

35 Object Name Object Type Object Property VT7600A5x00W VT7652A5x00W VT7600B5x00W VT7652B5x00W VT7600F5x00W VT7652F5x00W VT7606E5x00W VT7656E5x0

36 Object Name Object Type Object Property VT7600A5x00W VT7652A5x00W VT7600B5x00W VT7652B5x00W VT7600F5x00W VT7652F5x00W VT7606E5x00W VT7656E5x0

37 Object Name Object Type Object Property VT7600A5x00W VT7652A5x00W VT7600B5x00W VT7652B5x00W VT7600F5x00W VT7652F5x00W VT7606E5x00W VT7656E5x0

38 Object Name Object Type Object Property VT7600A5x00W VT7652A5x00W VT7600B5x00W VT7652B5x00W VT7600F5x00W VT7652F5x00W VT7606E5x00W VT7656E5x0

39 Object Name Object Type Object Property VT7600A5x00W VT7652A5x00W VT7600B5x00W VT7652B5x00W VT7600F5x00W VT7652F5x00W VT7606E5x00W VT7656E5x0

4 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFU

40 Object Name Object Type Object Property VT7600A5x00W VT7652A5x00W VT7600B5x00W VT7652B5x00W VT7600F5x00W VT7652F5x00W VT7606E5x00W VT7656E5x

41 Object Name Object Type Object Property VT7600A5x00W VT7652A5x00W VT7600B5x00W VT7652B5x00W VT7600F5x00W VT7652F5x00W VT7606E5x00W VT7656E5x0

42 Objects Supported By Models: (VTR7300 Controllers & VRP5000W Wireless Repeater) Please refer to the specific installatio

43 Object Name Object Type Object Property VTR7300A5x00W VTR7305A5x00W VTR7350A5x00W VTR7355A5x00W System Mode Enum Writable Present Value (R,W

44 Object Name Object Type Object Property VTR7300A5x00W VTR7305A5x00W VTR7350A5x00W VTR7355A5x00W Temporary Occupancy Time Enum Writable Pres

45 Object Name Object Type Object Property VTR7300A5x00W VTR7305A5x00W VTR7350A5x00W VTR7355A5x00W Auto Mode Enable Boolean Writable Present Val

46 Object Name Object Type Object Property VTR7300A5x00W VTR7305A5x00W VTR7350A5x00W VTR7355A5x00W Cool No/Nc Boolean Writable Present Value (R,

47 Objects Supported By Models: (VZ7000 Zoning Products) Please refer to the specific installation guide of each controlle

48 Object Name Object Type Object Property VZ7200F5x00W VZ7260F5x00W VZ7260C5x00W VZ7656B1000W VZ7656R1000W VZ7656H1000W VZ7656F1000W VZ7656E100

49 Object Name Object Type Object Property VZ7200F5x00W VZ7260F5x00W VZ7260C5x00W VZ7656B1000W VZ7656R1000W VZ7656H1000W VZ7656F1000W VZ7656E100

5 About Viconics Wireless Mesh Networks The Viconics wireless card (VWG-APP-1000) and related network able wireless controllers series oper

50 Object Name Object Type Object Property VZ7200F5x00W VZ7260F5x00W VZ7260C5x00W VZ7656B1000W VZ7656R1000W VZ7656H1000W VZ7656F1000W VZ7656E100

51 Object Name Object Type Object Property VZ7200F5x00W VZ7260F5x00W VZ7260C5x00W VZ7656B1000W VZ7656R1000W VZ7656H1000W VZ7656F1000W VZ7656E100

52 Object Name Object Type Object Property VZ7200F5x00W VZ7260F5x00W VZ7260C5x00W VZ7656B1000W VZ7656R1000W VZ7656H1000W VZ7656F1000W VZ7656E100

53 List of Property Numeric Value Range Restrictions Please refer to the specific installation guide of each controller for a detail

54 Object Name Object Type Thermostat Range / Indexes Minimum Supply Heat Setpoint Numeric Writable temperature,min=50,max=72 Mixed Air Setpoin

55 List of Property Enumeration Sets for BV Objects Please refer to the specific installation guide of each controller for a detaile

56 Object Name Object Type Thermostat Range / Indexes Low Battery Alarm Boolean Point falseText=Off,trueText=On Mechanical Cooling Enable Boole

57 List of Property Enumeration Sets for MV Objects Object Index Range Restrictions Alarm ( VT72xx & VT73xx ) 1 No alarm 2

58 Object Index Range Restrictions Aux Configuration 1 Not Used 2 Normally Opened With Occupancy 3 Normally Closed With Occupancy 4 Normally Op

59 Object Index Range Restrictions BI1 Config ( VZ7200X ) 1 None 2 Motion NO 3 Motion NC Effective Occupancy 1 Occupied 2 Unoccupied 3 Temporar

6 Only use Com1 option slot card position for the card

60 Object Index Range Restrictions Floating Motor Timing 1 0.5 Minutes 2 1 Minute 3 1.5 Minutes 4 2 Minutes 5 2.5 Minutes 6 3 Minutes 7 3.5 Min

61 Object Index Range Restrictions Minimum On/Off Time ( Anticycle ) 1 0 Minutes 2 1 Minute 3 2 Minutes 4 3 Minutes 5 4 Minutes 6 5 Minutes Eve

62 Object Index Range Restrictions Proportional Band-( VT72xx & VT73xx ) 1 2 ºF / 1.1 ºC 2 3 ºF / 1.7 ºC 3 4 ºF / 2.2 ºC 4 5 ºF / 2.8 ºC 5

63 Object Index Range Restrictions Sequence Of Operation (VTR73xx) Note 3 1 Cooling only 2 Heating only 3 Cooling / Heating or Cooling With Ele

64 Object Index Range Restrictions Temporary Occupancy Time-(VT73xx & VT72xx) 1 0 Hours 2 1 Hour 3 2 Hours 4 3 Hours 5 4 Hours 6 5 Hours 7

65 Note 1 For VT72xx, VT73xx & VTR73xx devices, usable enumerations for the System Mode depends on Sequence of Operation selected. The Auto

66 Integration – Global Commands The following figure shows which typical objects from each controller attached to a VWG can be

67 VT720xx Integration – Graphic User Interface (GUI) objects The following objects should be typically used in a GUI:  Room Temper

68 VT73xxX Integration – Graphical User Interface (GUI) Objects The following objects should be typically used in a GUI:  Room Tempe

69 VT76xxX Integration – Graphical User Interface (GUI) Objects The following objects should be typically used in a GUI:  Room Temp

7 Basic Initial Design and Deployment Consideration IMPORTANT: It is HIGHLY recommended that you do a proper field survey with the Viconics

70 Tips and Things You Need To Know  Be sure all controllers / controllers communicating to any single JACE are using th

8 Any given device / node / controller including the Jace –coordinator can ONLY give a maximum 6 ZigBee addresses out to other devices so they j

9 Orphan Nodes. As such it is important to understand that HOW the network is first initially started up “may” create orphan unassigned devices