Viconics VZ7260X Installation Guide Bedienungsanleitung PDF herunterladen (Seite 18)

18 | VZ7260B Series - Installation Guide

BI1

Binary input no.1

configuration

Default: None

(None): No function will be associated with the input. Point

can still be monitored through the BACnet ™ network.

(Motion NO): Used in Occupied Mode only to toggle from

the Occupied setpoints to the Stand-By setpoints when no

motion is detected for 60 minutes at the zone.

When motion is detected at the zone, the Occupied

setpoint resumes.

Contact opened = No motion detected.

Contact closed = Motion detected.

(Motion NC): Used in Occupied Mode only to toggle from

the Occupied setpoints to the Stand-By setpoints when no

motion is detected for 60 minutes at the zone.

When motion is detected at the zone, the Occupied

setpoint resumes.

Contact opened = Motion detected.

Contact closed = No motion detected.

AI4

Analog input no.4

configuration

Default: None

(None): No function will be associated with the input. Point

can still be monitored through the BACnet network.

CO2: Used when a 0-10VDC CO2 sensor is connected to

AI4 input. The value of the input signal is displayed in AI4

Dis parameter.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 34 35

Keine Kommentare

Viconics VZ7260X Installation Guide Bedienungsanleitung Seite 18