Viconics VT7000 Series PIR Application Guide Bedienungsanleitung PDF herunterladen (Seite 11)

VI-PIR Cover Installation

• Remove security screw on the bottom of the current thermostat cover.

• Open up by pulling on the bottom side of thermostat. (Fig. 3)

A) Identify current thermostat model type:

• Use appropriate cover accessory part number as identified on the first page by referring to the thermostat model

number

• The male polarized PIR connector is located at bottom left corner of thermostat (Fig. 4)

B) Installation:

• Hinge new PIR thermostat cover into position (fig. 3).

• Insert polarized connector into PIR female connector located on thermostat base (Fig 4 and 6)

• Snap PIR thermostat cover into place and re-install the security screw (Fig. 5)

• Make appropriate parameter settings related to your application within the configuration menu as identified in the

thermostat installation

• Electronic controls are static sensitive devices. Discharge yourself properly before manipulation and

installing the thermostat and its accessories.

• Short circuit or wrong wiring may permanently damage the thermostat or the equipment.

• All VT7000 series thermostats are to be used only as operating controls. Whenever a control failure

could lead to personal injury and/or loss of property, it becomes the responsibility of the user to add

safety devices and/or alarm system to protect against such catastrophic failures.

Specifications

PIR cover power requirements: 5 Vdc Max current draw of 7mA

Operating conditions: 0 °C to 50 °C ( 32 °F to 122 °F )

0% to 95% R.H. non-condensing

Storage conditions: -30 °C to 50 °C ( -22 °F to 122 °F )

0% to 95% R.H. non-condensing

Sensor: Local Passive Infra Red Sensor

Dimensions with Thermostat: 4.94” x 3.38” x 1.13”

Approximate shipping weight with Thermostat: 0.75 lb ( 0.34 kg )

Agency Approvals:

UL UL 873 (US) and CSA C22.2 No. 24 (Canada), File E27734 with

CCN XAPX (US) and XAPX7 (Canada)

FCC Compliant to CFR 47, Part 15, Subpart B, Class A (US)

Industry Canada ICES-003 (Canada)

CE EMC Directive 89/336/EEC (Europe Union)

C-Tick AS/NZS CISPR 22 Compliant (Australia / New Zealand)

Supplier Code Number N10696

Drawing & Dimensions

Thermostat Dimensions

Fig.5

Fig.4

Fig.3

Fig.6

1 2 ... 6 7 8 9 10 11

Keine Kommentare

Viconics VT7000 Series PIR Application Guide Bedienungsanleitung Seite 11